These heat stick housings make it very easy to build a RIMS recirculating mash system.

Includes:  
- 1 x RIMS tube TIG welded from 304 stainless with 2 threaded 1/2 bsp ports either end
- 1 x Silicone beaded seals
- 1 x Tri-clover clamps . 
- 1 x End plate with 32mm hole
- 1 x solid end of tube with 20.5mm hole  (to fit thermowell, or can be blocked off.

These RIMS housings have been made with TIG welded 50mm stainless pipe with 2 x ½” BSP female sockets at right angles in the top and bottom for the wort to flow in and out.

On each end there is a tri-clover end cap. one with a 32m hole pre-drilled so it is ready to mount a 2200 watt stainless steel element. The other end cap has a 20mm hole so it is ready to mount either a thermowell or a bulkhead. 

this makes it very easy to then use a temperature controller  and pump to build your own re-circulating RIMS system.