HOSE BARBS:

Male pipe thread on one side, hose barb on the other. Screw directy linto 3 piece ball valves

Available in brass 1/2MPT x 1/2 hose barb $6.50
stainless steel 1/2MPT X 1/2 hose barb $12.50
stainless steel 1/2MPT x 3/8 hose barb $10.50
hardened food grade polyethelene..$12.50

Blichmann Engineering Stainless steel quick connector fittings

Everything that touches your wort is stainless . Nickel plated brass nut won't lock-up on stainless fittings. Installs without tools! Easy disassembly and no hidden crevices means it's a snap to sanitize! Silicon O rings allows the nut to swivel easily.
1/2 " NPT screws straight onto the hopblocker......
order with hose barb size 1/2" or 3/8
2 compete connectors in a pack ..$18.50 (or $10.50 single connector )

also fits March pump, Blichman Therminator. Hop Rocket

Stainless steel quick connector: 1/2" MPT SS Female Quick Disconnect. ..$14.50

Used with the stainless steel Male quick disconnect below these disconnects seal well in either flow direction, without a lot of work connecting them. These feature a 1/2" male national pipe thread on the outer ends for easy connectivity (ball valves etc) Made from 304 stainless steel. Will hold pressure for brewing applications when moving liquids at 60psi or less.

Stainless steel male quick connect / 1/2" hose barb fitting (clicks into above female connector).....$10.50

Buy complete set (male/female)...$22.00

1/2"coupler. (socket fitting).....$5.50

316 Stainless steel ball valves..1/2" female pipe thread.
Feature HIGH HEAT RESISTANT TEFLON seals. Disassemble for cleaning and maintenance. Replacement seal kits available. Locking handle prevents accidental spills. Ideal for wort pumps, kettles, boilers, hot liquor tanks

1.Recommended fit the above quick connector fittings to the outlet of this ball valve for fast easy hose connectivity.

2. Recommend the weldless kettle bulkhead below to fit to your own kettle.

$39.00

Weldless Kettle Bulkhead....$19.00
parts that come in contact with liquid are stainless steel. Brass locking nut on outside of kettle only. Fits all 1/2" ball valves. Silicone seals
Use to fit a ball valve to a kettle.

Also available for esky/cooler with thicker wall.