beer kegs and kegging accessories

Stainless steel beer kegs, kegging hardware and gas products
We stock all NEW products ONLY
All spare parts are for Spartenburg(Firestone), AEB and Cornelius products

home to ibrew

19 litre NEW AEB (made in Italy) stainless steel kegs. Strong, esay to clean, steel sidewalls for rugged useage.

Relief valve vents at 130 PSI

Rubber Base and handles eliminate tank and connector damage
Pressure rated to 138 psi ..keg only. ....$195.00

1. Ball lock Relief Valve..$15.50
1. Pin lock Relief valve (not in stock)
2. Dip Tube gas (short ..for 3 or 5 gallon) ..$5.95

3. Dip Tube rubber ring..$1.50
4. Dip Tube liquid (long,angled for 5 gallon.)..$15.95
6. Complete Replacement Lid..$24.00 (includes relief valve)
7. Replacement closure ring...$6.50

TANK PLUGS with poppett valve: liquid.....$22.00

TANK PLUGS with poppett valve: GAS...$22.00

(tank plugs without poppett valve...$16.00

POPPET VALVES..$8.00

	Serve your beer from keg to glass Black handles: Chrome $95.00
	Beer Tap: Blue handles: Stainless steel...$110.00
	Maintenance kit of spare parts/Orings for above beer guns...$8.50
	E.K tap 3" x 3/8" BSP (Fridge Tap) Chromed brass finish. 3" x 3/8" BSP shank. Standard nozzles available. Comes complete with washers and lock nut.\ and hose connectorUser friendly. No special tools required for servicing. *100% Australian Made. Fridge tap..$95.00 hose connector...$15.00
	BLICHMANN BEER GUN We have dedicated a page to this revolutionary bottle filling gun.
	Fridge tap: Gold plated tap with black handle...$50.00 Stainless steel fridge shank (4 1/2 inch) with coupling and hose nipple...$55.00
	Fridge tap: Chrome tap with black handle...$45.00 Stainless steel fridge shank (4 1/2 inch) with coupling and hose nipple...$55.00

DRAFT ACCESSORIES	Disconnects Ball Locks 1/4" MFL threaded gas disconnect/gas in(white)..$11.50 1/4" MFL threaded liquid disconnect/beer out(black).$11.50 also available with HOSE BARB instead of thread
	Stainless steel ball lock quick disconnects Gas or LIquid available in either hose barb or 1.4"MFL $55.00 each. Please don't forget to specify if you want gas or liquid.
	1/4" hose barb swivel nut connect with hose barb and hose clamp..$7.50 fits onto 1/4" MFL threaded liquid disconnect above , or all 1/4" MFL connections.
	1/4 hose barb Swivel nut connect and threaded hose barb kit includes nylon seals...... fits ID 4-5mm gas lines.
	3 Way split: Threaded T ..MFL ...$12.00 This is recommended with the Blichmann beer gun to split the gas line. With the blichmann beer gun accessory kit you get 1 swivel connect, so you only need to buy 2 swivel connects. swivel nut connects each ....$7.50 each
	C02 ballock Coupler 5/16 barb female...$18.00 C02 Coupler 5/16 barb male........$9.00
	BEER AND GAS QUICK DISCONNECT (couplers) WITH SHUTOFF Highest quality, food grade quick disconnects suitable for beer or gas lines (120psi). Feature 1/4" barbed fitting each end which can be used with 5mm to 7mm ID line. The quick disconnect is activated by a shrouded thumb latch. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. Temperature rated -40F - 180F SET of Quick Disconnects with Automatic shut off ..$35.00
	Brass Y Adapter: ....$15.50 (screw into your regulator to split the gas line two ways.) One 1/4" MPT port thread. Two 1/4" FPT ports. Screw a ball check valve or a shutoff valve into the female ports May require a reducer part 1/4FPT x 1/8MPT to screw into some regulators.
	Top image: Shut Off ball Valve:1/4" MPT x Threaded 1/4" MFL ( fits a barbed swivel nut) with integral check valve: ..$25.50 without check...$ Middle image: Shut Off ball Valve:1/4 MPT x 1/4 hose barb with integral check valve..$25.50 without check...$ Bottom image: Shut Off ball Valve . straight flow through no check 1/4 hose barbs both ends $22.50
	Brass Y Adapter (1/4"MPT) fitted with 2 shut off ball valves (with check)1/4MPT X 1/4 Hose barbs....Screw straight into regulator. May require a reducer (pictured) 1/4FPT x 1/8MPT to screw into some regulators.
	Hose clamps. Easy screw for tightening or loosening around your hoses 1/4 to 7/8" ..$1.50 1/8 to 1/2" ..$1.20
	Handy beer tap/Faucet and hose with swivel nut connect. attach directly to your beer out ball lock...$15.85
	Chrome Beer tap /faucet..$32.50 and keg faucet assembly/adapter to allow tap to be fitted to liquid quick disconnect $ 16.00 threaded liquid quick disconnect..$11.50
	TEE hose connect.Suitable for 5-6mm ID lines..Splits your hoses 3 way. Suitable for splitting the gas line to operate the Blichmann beer gun or to supply gas two ways. .. 1/4 barb (5-6mm) ....$5.95 3/8 barb.....$6.50


	250gm Keg and Line Cleaner . Keeps keg lines and kegs sanitised and free of beer build up. .....$6.30

filter housing, filter cartridge, hoses and connections

BEER FILTRATION:

For accelerated clearing and conditioning of your beer using C02 and kegging equipment.

Transfer beer from one keg at 10psi through the filter to a second keg or receiving container to remove yeast and sediment from your home brew.

1 x 10" clear filter housing.....$58.00

1 x U.S.A 10" pleated 1 micron 'Absolute'' filter cartridge..$57.00
(reusable)

1 x 6ft jumper hose (Bevlex) and connection parts (3/8MPT X 1/4 FFL) to fit from Black threaded beer out disconnect to filter housing .....$18.00

1 x outlet hose barb connection (3/8MPT x 1/4barb) ...$5.50

	Mykegonlegs supply new 6.8kg and 4.5kg Catalina CO2 Cylinders which are perfect for the home brewer. Owning your own gas cylinder provides a cost effective alternative to CO2 cylinder rental. This can save you around $800 over 10 years based on current cylinder rental costs. When you buy a mykegonlegs CO2 cylinder you own a brand new Catalina Cylinder to use and resell in the future if you wish. The 6.8kg and 4.5kg sizes also offer brewers a viable choice being large enough for the serious brewer and more economical to fill than smaller cylinders on the market. All Mykegonlegs cylinders are brand new factory finished, high strength, lightweight aluminum alloy and generally have a working life well in excess of 20 years. All Mykegonlegs cylinders and valves are compliant with Australian safety and regulatory standards. There is a large network of refill stations. Contact us for the closest refill station near you. 6.8kg new Mykegonlegs, Catalina keg.....$295.00 6.8kg new Mykegonlegs, Catalina keg filled with C02...$POA note. We mail order this keg empty of gas.
	Tesuco Dual Gauge C02 Regulator. Made in Australia Simple to use. Built in safety relief valve. Non return valve built into outlet Meets AS4267 $95.00
	Harris C02 Regulator...$110.00 Designed for beer dispensing that does not require highflow e.g. Homebrew/Party hire. Harris believed that reducing gas leaks was a major concern in the development of this regulator, and designed a regulator with special threads and safety seals. Features include - Wt. 0.8kg Metal case gauges Made by Harris to ISO 9002 Brass body & bonnet Smooth adjustment 0-400kPa Internal self reseating safety relief valve Special threads/seating to reduce risks of leaks
	U.S.A Regulator with two way split. Divides your gas line two ways. Fits My keg on legs gas bottle $185.00 complete unit as pictured

Mykegonlegs supply new 6.8kg and 4.5kg Catalina CO2 Cylinders which are perfect for the home brewer.

Owning your own gas cylinder provides a cost effective alternative to CO2 cylinder rental. This can save you around $800 over 10 years based on current cylinder rental costs.

When you buy a mykegonlegs CO2 cylinder you own a brand new Catalina Cylinder to use and resell in the future if you wish. The 6.8kg and 4.5kg sizes also offer brewers a viable choice being large enough for the serious brewer and more economical to fill than smaller cylinders on the market.

All Mykegonlegs cylinders are brand new factory finished, high strength, lightweight aluminum alloy and generally have a working life well in excess of 20 years.

All Mykegonlegs cylinders and valves are compliant with Australian safety and regulatory standards. There is a large network of refill stations. Contact us for the closest refill station near you.

6.8kg new Mykegonlegs, Catalina keg.....$295.00
6.8kg new Mykegonlegs, Catalina keg filled with C02...$POA

note. We mail order this keg empty of gas.

Tesuco Dual Gauge C02 Regulator.
Made in Australia

Simple to use. Built in safety relief valve.
Non return valve built into outlet
Meets AS4267
$95.00

Harris C02 Regulator...$110.00
Designed for beer dispensing that does not require highflow e.g.
Homebrew/Party hire.
Harris believed that reducing gas leaks was a major concern in
the development of this regulator, and designed a regulator with
special threads and safety seals.
Features include - Wt. 0.8kg
Metal case gauges
Made by Harris to ISO 9002
Brass body & bonnet
Smooth adjustment 0-400kPa
Internal self reseating safety relief valve
Special threads/seating to reduce risks of leaks

U.S.A Regulator with two way split. Divides your gas line two ways.
Fits My keg on legs gas bottle

$185.00 complete unit as pictured

	PURE INNOVATIONS KEG CHARGER : Keg charger and 3 x 16gm Genuine Innovations unthreaded Cartridges.........$35.00 purchase threaded gas ball disconnect ...$11.50 purchase keg charger on its own ....$30.00 The Pure Innovations CO2 Charger is the ideal tool for any home brewer using Cornelius type kegs. It eliminates the need for cumbersome and costly CO2 tanks, regulators and hoses.Connects to threaded gas ball or pinlock disconnect Attach the pin-lock or ball-lock valve (threaded valve) to the Keg. Connect the charger by threading it directly onto the quick disconnect valve. You can easily control the flow of CO2 into the keg by pressing the finger trigger, and then stop the gas flow by releasing the trigger. Any remaining CO2 left in the cartridge can be saved for later use. WARNING: Never attach the ball or pin lock valve to the charger first. It can cause the valve to be OVER-PRESSURIZED and fail. Always attach the ball or pin lock valve to the keg first, then attach the CO2 Keg Charger to the disconnect valve. Construction: High strength, glass-reinforced nylon, with brass valve internals.
	16gm Pure Innovations UNTHREADED C02 Cartridges UNTHREADED Pure Innovations cartidges are recommended for the Pure Innovations keg charger) each 16gm cartridge....$4.50 larger quantities price on application
8gm C02 chargers	ISI CARTRIDGES FOR TAP-A-DRAFT BEER TAP MACHINES/kegs Made of 100% recyclable steel, gold, non refillable. One cartridge contains either 8gm or 16 g pure CO2. Suitable for beer tap systems working with 16g CO2. Please follow device manufacturer's instructions. isi 8gm cartridges are recommended for the TAP-A-DRAFT system and for all isi soda bottles 8GM isi C02 (Austrian) CARTRIDGES Per 1 box (10 cartridges per box)..... $8.50 per 3 boxes...$8.00 each per 6 boxes...$7.50 each isi N2 (nitrous oxide) cartridges..(known as cream chargers) Per 1 box (10 cartridges per box)..... $9.00 per 3 boxes...$8.50 each per 6 boxes...$8.00 each
	PORTABLE KEG SYSTEMS Tap-a-draft systems ..click here for more information on the Tap-A-Draft system uses 8gm isi c02 chargers
	iSi Soda siphons: Refreshing sparkling soda water prepared in seconds. Ideal for mixing cocktails, soft drinks or for drinking pure sparkling water. Use iSi soda chargers available in boxes of 10 chargers. SPARKLING WATER FLAVOURS Black soda siphon..$85.00 Silver soda siphon..$85.00 more information and recipes for soda siphon click here

PURE INNOVATIONS KEG CHARGER :

Keg charger and 3 x 16gm Genuine Innovations unthreaded Cartridges.........$35.00

purchase threaded gas ball disconnect ...$11.50

purchase keg charger on its own ....$30.00

The Pure Innovations CO2 Charger is the ideal tool for any home brewer using Cornelius type kegs. It eliminates the need for cumbersome and costly CO2 tanks, regulators and hoses.Connects to threaded gas ball or pinlock disconnect

Attach the pin-lock or ball-lock valve (threaded valve) to the Keg. Connect the charger by threading it directly onto the quick disconnect valve. You can easily control the flow of CO2 into the keg by pressing the finger trigger, and then stop the gas flow by releasing the trigger. Any remaining CO2 left in the cartridge can be saved for later use.

WARNING: Never attach the ball or pin lock valve to the charger first. It can cause the valve to be OVER-PRESSURIZED and fail. Always attach the ball or pin lock valve to the keg first, then attach the CO2 Keg Charger to the disconnect valve.

Construction:
High strength, glass-reinforced nylon, with brass valve internals.

16gm Pure Innovations UNTHREADED C02 Cartridges

UNTHREADED Pure Innovations cartidges are recommended for the Pure Innovations keg charger)
each 16gm cartridge....$4.50
larger quantities price on application

8gm C02 chargers

ISI CARTRIDGES FOR TAP-A-DRAFT BEER TAP MACHINES/kegs
Made of 100% recyclable steel, gold, non refillable. One cartridge contains either 8gm or 16 g pure CO2. Suitable for beer tap systems working with 16g CO2. Please follow device manufacturer's instructions.

isi 8gm cartridges are recommended for the TAP-A-DRAFT system and for all isi soda bottles

8GM isi C02 (Austrian) CARTRIDGES

Per 1 box (10 cartridges per box)..... $8.50
per 3 boxes...$8.00 each
per 6 boxes...$7.50 each

isi N2 (nitrous oxide) cartridges..(known as cream chargers)
Per 1 box (10 cartridges per box)..... $9.00
per 3 boxes...$8.50 each
per 6 boxes...$8.00 each

PORTABLE KEG SYSTEMS

Tap-a-draft systems ..click here for more information on the Tap-A-Draft system
uses 8gm isi c02 chargers

iSi Soda siphons:

Refreshing sparkling soda water prepared in seconds. Ideal for mixing cocktails, soft drinks or for drinking pure sparkling water. Use iSi soda chargers available in boxes of 10 chargers.

SPARKLING WATER FLAVOURS

Black soda siphon..$85.00

Silver soda siphon..$85.00

more information and recipes for soda siphon click here

for a quote for goods delivered, or information please contact info@ibrew.com.au

Terms and Conditons of Trade, Payments, Privacy. Contact details